|
4 - Tools and materials
Here is a list of most of the tools and materials most of you will need:
The Fork Parallelness gauge
A piece of 1/4" plate glass approximately 10" x 12"
Various hand tools needed to remove the fork legs, top plate, front wheel, front brake and related parts- tools such as sockets, wrenches, screwdrivers, a rubber mallet, etc.
A +/- 6' 2x4" or equivalent
Ratchet straps and/or some rope
A large clamp or two
A metal bar of some sort for holding the forks when tightening the upper spring retainer nuts
Fork Oil
New copper crush washers for the ends of the dampers
New fork seals
Cleaning solvent
Lint-free rags
An old bedspread or blanket
A few containers of some sort to place removed parts
There are other tools that might be necessary, but these are mentioned in the text.
|
